1. This product was added to our catalog on .

    Premium Quality CISS IP7260 Pre-Chipped
    [IP7260C riha]

    Price:  $170.00

    Reviews

Premium Quality CISS

Prefilled with 500ml of ink

US UV nano-micron filtered ink

Inks colour profiled specifically to match Canon PGI-650

and CLI-651 series cartridges

UV absorber components for increased print fade life

Silicone tubing and ABS plastic ink reservoirs (UV block)

Isobaric equilibrium structure (Constant pressure) 

Silicone seal system (specific to Canon printers) ensures no air breach

500mls of ink is equivalent to approximately 74 cartridges

which would cost you over $1680.00*

System cartridges are pre-chipped and ready for installation

 

Quality of CISS
Ink Quality
Easy Install
Full Support Provided

 

 

 

The unit comprises of a large reservoir of ink (100mls of each colour) that sit outside your printer. Attached to the reservoir is a set of silicone tubes which feed into special cartridges which you use instead of your current cartridges. The printer works exactly the same way but now you have 100mls of each colour rather than 10mls (which is the contents of the average cartridge).

Even better, when you get low on ink, just pull out the plug on the reservoir and pour in some refill ink.

 

Best of all you are saving up to 96% compared to the cost of cartridges.

 

Obviously, the more you print the more you will be saving.

 

Consider it this way, The Canon CLI-651 colour cartridges have approximately 6mls of usable ink inside while the PGI-650 has around 14mls. Canon CLI-651 cartridges retail for around $22.99 each and the PGI-650 is about $19.94 (prices correct as of Jan 2014 via officeworks online*)

 

Rihac CISS is prefilled with 500ml of Rihac ink and is equivalant to approximately 74 Canon cartridges which would cost you about $1680.00 to purchase seperately.

 

 

A Rihac set of replacement inks (5 x 100ml of each colour) would cost you $63 for 500mls of ink. To buy the same amount of Canon cartridges it would cost you over $1680*. Therefore when refilling your CISS you will save $1617 everytime you refill!!!

 

How long it take to install the unit?

Comprehensive instructions are provided with your inklink. The system should take you 20-30 minutes to install depending on the printer model.

 

 

Please read prior to making a purchase of this product:

This product requires the use of the genuine cartridge chips from your Canon cartridges in order to operate. We also offer the unit pre-chipped for an additional cost. Selecting a pre-chipped system means the chips are fitted by us and ready for use.
The images depicted below are a brief example of the procedures you are required to carry out to attach cartridge chips if you purchase the unit unchipped. Comprehensive instructions are provided with your InkLink and technical support is also available via phone or email .This product is not sanctioned or manufactured by Canon and users must be aware that the use of third party cartridges and CISS systems may void your printer warranty.

 

Continuous Ink Supply Systems require a perfect seal between the print head and the print cartridges. Over a decade ago the rihac engineers developed special silicone washers which create an air tight seal between the inkjet cartridge and print head. 
The result is a perfect air seal that prevents air developing in the CISS feed lines and maintains optimum operating performance. In simple terms this makes your system reliable with no issues caused by air and ink leakage

Please select a question below.

Is it difficult to install a CISS?

CISS installation on Canon printers is relatively straight forward but it does take more time and care than other brands. The reason is due to the type of cartridges used by Canon printers. Canon cartridges are 'wet' exit cartridges, which simply means the exit point of the cartridge (the bit where the ink comes out) is unsealed.

 

The entire installation process can take a good 20-30 minutes. It is important to read and follow the instructions during installation and this will ensure trouble free use. The vast majority of problems are a result of not following the instructions duuring installation. The most important part is the priming of the system prior to installation and ensureing the air balance tubes are empty. These simple but important steps make all the difference.

 

A copy of the installation instructions can be seen via the videos/manual tab so you can get a good understanding of the process.

Should I keep my original cartridges that came with the printer?

We recommend keeping the cartridges which came with your printer.

 

Before installing the CISS they are needed to ensure your print head is printing correctly. Also, should you ever have a genuine warranty issue with your printer most manufacturers require you to have genuine cartridges installed when having the printer repaired.

Why should I use a CISS instead of normal cartridges?

The simple answer is that you are wasting money not using one, and significant amounts of money at that.  Using a CISS reduces the cost of printing significantly, in fact by up to 95%.  Even with the initial cost it is roughly the price of one set of cartridges but you get at least 10 times the amount of ink. 

 

If and when you need to refill the CISS you can legitimately save an average of $1,000.00.  Whilst all brands and cartridges contain different amounts of ink and are all priced differently an average cartridge these days contains less than 10mils of ink and cost around the $25 mark.  So you pay around $2.5 for every mil of ink.  A bottle of the highest quality premium refill ink from inkghost costs around $14 for 100mils, so 14c per mill. This would make your $25 cartridge cost you $1.40 from Inkghost. 

Does installing a CISS void my printer's warranty?

This is a very grey area. Strictly speaking any printer modification will void any warranty.

 

A CISS is not a modification and is the same as using any other third party cartridge. Further the use of third party cartridges (such as a CISS) MAY void a warranty. In most cases a manufacturer requires their particular brand of cartridges to be installed before undertaking any repairs. So simply removing the CISS and reinserting a set of cartridges when returning the printer for repair would satisfy this requirement.

 

Over the years we have sold tens of thousands of CISS units and are only aware of one case where a repair agent refused to repair a printer (with the CISS removed) and in that case the consumer had informed the manufacturer they had been using third party cartridges. In this case the customer chose to challenge the matter by taking it to the local small claims tribunal which resulted in the repairer having to repair the printer as the damages were unrelated to the use of the CISS.

 

Our advice is to consider that your warranty would be voided by using a CISS however the fact that you will save much more money in the long run far outweighs the warranty issue. These days it is often cheaper to buy a new printer than one set of genuine cartridges.

Where do I place the CISS once installed?

The CISS ink reservoir sits outside your printer on the same bench or table as your printer.

Are there any situations when using a CISS is not recommended?

If you very rarely print and take more than a year to go through cartridges then it may not be for you. Ink does have a shelf life. The quality of the ink dictates the shelf life.

 

Basic quality inks have a 3 month shelf life, standard around 6 months and Premium up to 18months. All the inks can be used well past these periods but will fade quicker the older they are.

I've heard that third party inks can damage my print head and printer?
This is true and it is often difficult to wade through the 'creative' advertising of ink sellers to determine fact from fiction. A quick look on Ebay and you will see hundreds of inks for sale with the majority having been manufactured in Asia. Most of these inks have been manufactured for the Asian market which has a low income average, thus their priority is price over quality. This means using cheaper core products and carrier fluids and skimping on things like filtration. Generally the cheaper inks have a significantly less shelf life (as low as 3 months), where the highest quality inks can be used for years without the fade life decreasing or the particle size swelling.

It is a complex subject but suffice to say we make sure we offer three qualities of ink and make sure none of them contain anything that will damage the print heads. Generally speaking the chemical makeup of the inks is almost identical to the OEM manufactures inks.
What is the quality of the print out like?

Generic inks from our Basic and Standard CISS systems are very basic, and quality may be fairly average, good for basic home use and printing text documents. The colours are reasonably accurate but not as photographically accurate as the premium inks from RIHAC.

 

Basic and Standard inks will also have a limited life when exposed to sunlight and UV light. The results vary depending on exposure but prints can start to fade within weeks of printing and it is accepted that basic dye inks can be up to 80% less durable than OEM inks, standard dye inks around 60% less durable and premium dye inks around 25% .

 

If you would like to print photos and higher quality documents and/or you require longer print life you may want to consider the Premium Rihac Inklink CISS System combined with a good quality inkjet photo paper. The paper you print on has a significant effect on your print life. It is often the photo paper which dictates the life of the print with the higher end papers (resin encapsulated) significantly prolonging print life.

Are there any precautions to using a CISS?

There are very few rules for using a CISS because they are essentially just a big cartridge. However there is one major golden rule:

 

NEVER raise the system above the printer. It is common sense because liquid (ink included) always tries to go to the lowest point. If you raise the system above your printer that lowest point will be inside your printer. You cannot fool gravity and you we are good but we cannot trick the laws of physics. All CISS systems are designed to sit on the same table as your printer, that way the lowest point is the ink reservoir. All CISS systems are designed this way deliberately to ensure the ink cannot leak into your printer.

 

HEAT – Common sense here but it's not a good idea to have your ink reservoir in a place where it is exposed to radiant heat, for example having exposed to the radiant sun shine through the window on a 35 degree day. Air expands when heated and a CISS system balances using barometric pressure. So if the air inside the ink reservoir expands enough it can push some ink up the air balance tubes and this can overflow small amounts of ink from the top of the reservoir. This can easily be avoided by keeping the unit out of extreme heat conditions and by ensuring when you first install the CISS you follow the instructions and empty the air balance tubes.

I've heard they stuff up after a while?

CISS units are extremely simplistic in design. The greatest problem we see is people not reading the instruction manual and installing the units by guessing. You have a perfectly good instruction manual so please read it.

 

Really the only inconvenience is air in the system and this is generally because it was not removed prior to installation. Then when it does become an issue it can effect print quality which prompts some customers to again not read the manual but to 'self diagnose' and do things like raising the ink system above the printer which pushes ink into the printer and actually makes the air issue worse. Again these are very simple issues to avoid by simply reading the installation manual or watching our videos.

Do I get any support with this product?

The basic and standard systems are import product manufactured by Chinese manufacturers. The instructions are basic and support is very limited.

 

If you are looking for a system with great support consider the Premium option, in this case the Rihac Inklink. It is a higher quality product and support is 100% provided by the manufacturer, rihac based in Melbourne. No one knows CISS better than them after all they invented it.

Are there any instructions with this unit?
The basic and standard systems come with basic setup instructions. The premium quality units come with a far more in-depth manual which covers all troubleshooting and support issues.
Are these inks dye, pigment or sublimation ink?

Canon printers (and Canon OEM carridges) use dye based ink in the colour cartridges and a pigment ink in the black text cartridge.

 

All CISS units use dye based ink for both the colour and both black cartridges. The reason for this is that pigment ink is much like sand in water and heavily prone to settlement (particularly in large volumes like 100mls). By using dye inks which are compleltely soluble we can ensure there is no risk of damaging or blocking the print heads.

 

Dye ink is a water based ink and is a great all round ink. It produces fantastic vivid prints when used on inkjet photo paper but is not waterproof. Dye inks are also susceptible to fading caused by the molecular breakdown caused by UV light.

 

Sublimation ink is a patented ink which turns into a gas when heated. It is used to print onto t-shirts and items which have special coatings to hold the inks.

 

Sublimation ink and printing is a specialised item and not suitable in Canon printers due to their thermal print heads.

 


For emptying air balance chamber instructional
video please click here

 

 


Instructions Coming Soon

 

 

 

 

 

Rihac is a Melbourne based company and the world leader in continuous inking products. For the better part of a decade they have been engineering and developing ink supply units known as the Inklink® or CISS for the majority of brand named printers such as Canon, HP, Brother and Epson.

 

 

From humble beginnings back in 2002 they created the first InkLink CISS unit based on a gravity flow system created in the USA. Rather than using a gravity based system, rihac developed a purpose designed and self-contained ink reservoir. This reservoir was engineered with special 'air balance tubes' to balance the pressure regardless of the ink level and act like a normal ink cartridge. They made the system endlessly refillable and set about using the best quality inks they could source. Since then, rihac have established themselves as the world leaders in ink supply systems and produce products for more printers than any other similar products in the world.

 

With ink base products supplied from Cabot's (USA) and Diamond (UK) they make 100% sure that their products will never damage your print heads and will match the OEM colours.


Their dye based inks are micro filtered and have a special UV absorber to maximise print life beyond generic inks. Their inks were even reviewed by choice magazine who rated them as the only aftermarket inks tested that matched the original cartridge colours.

Rihac products have been the subject of many other reviews (available online) and product awards, including being a finalist for the 2011 Women's Weekly product of the year and 2012 Telstra Business Awards People's Choice Winners and MYOB small business awards Victorian Finalist both 2012 and 2013. Testament to the quality and product support is the numerous online comments and customer reviews available on our website, Ebay and online.

 

 

Rihac also have a team which visit community groups and other interested parties giving talks on colour printing, colour management issues, printer choices and of course the rihac product range.